A nice benefit of getting your security system set up by trained experts is that you seldom need to concern yourself with it. However, there will likely be a couple situations when you have to reset your alarms in Decatur. If you use the ADT Command interface, a reset typically needs only a couple taps of the touchscreen following a false alarm, power outage, or battery change.
Read The Owner’s Manual Before Attempting An Alarm Reset
Here’s a simple yet valuable tip before you begin to reset your Decatur home security system, read your owner’s manual ahead of time. You wouldn’t want to compromise your property’s defense due to pressing a button in error. Also, the process might have changed if you moved from a numbered keypad to a modernized touchscreen interface. And if you can't reset your system, don't hesitate to call the experts.
Resetting Your Decatur Home Security System After A False Alarm
Usually, a false alarm occurs because of the accidental tripping of a sensor. You are able to utilize the control panel or open your ADT security app and hit the shield icon and type in your unique passcode to deactivate the alarms when this occurs. You may get a call from your security monitoring team, but just tell them it was a false alarm.
Resetting Your Alarm Following A Power Outage In Decatur
If the power goes out because of high winds or other factors, you may start hearing a repeated, high-pitched beep from your alarm’s central interface. This signifies that your security is running off the backup battery. To reset the alarm and silence the steady beeps, you should deactivate and reactivate your system.
Keep in mind, if you lose power for an extended time, you might need a full system reset. Pay careful attention to the directives in your user’s handbook -- typically by entering your unique passcode and hitting the designated button twice -- and you should be running fine. You may still hear the auxiliary power beeping, as it might not stop until your battery reaches a full charge. Contact your security technician if you are still having difficulties with your ADT equipment at least 20 hours after your power is back on.
Reset Your Home Security System After Replacing A Battery
On occasion you need to change a battery powering one of your security devices. When this needs to be done, you want to set your alarm system to test mode so you avoid triggering an alarm by accident. When the new battery is put in place, change the system from "Test Mode" and restore your usual settings. If the system is unable to register the device or the battery indicator remains on, you might have to perform a full reset of your security system.
Tips to Reset Your Decatur Security System When Adding Or Removing A User
Adding and deleting users can be completed on the ADT Command panel and your ADT smartphone app. You won’t need a reset of your alarm after adding or removing users. With that being said, if you move into a new home already equipped with an ADT security system, you should call your residential security experts at (256) 246-8823 to set up a new contract. The installation tech will visit your property to replace components, install other components (if necessary), and perform a full reset.
A Well-Designed Security System Can Be Yours Today
Resetting a home security system in Decatur is frustrating if it fails to include understandable devices and controls. If you’re ready to acquire your easy-to-use home security system, dial (256) 246-8823 or submit the form below. We’ll be pleased to design the ideal security system for your needs.